
injection molding machine hopper dryer
Models:
Model | Capacity (KG) | Electric Heating (KW) | Fan (W) | Power (V) | Dimensions (MM) | Base (MM) | Weight (KG) |
NHD-25 | 25 | 3.5 | 122 | 220/1Φ | 760*500*1040 | 160*160*Φ6.2 | 34 |
NHD-50 | 50 | 4.5 | 157 | 220/1Φ | 870*540*1210 | 160*160*Φ7 | 45 |
NHD-75 | 75 | 6.5 | 157 | 380/3Φ | 940*600*1310 | 160*160*Φ7 | 56 |
NHD-100 | 100 | 6.5 | 246 | 380/3Φ | 1010*700*1410 | 180*180*Φ8 | 68 |
NHD-150 | 150 | 9 | 350 | 380/3Φ | 1100*740*1620 | 200*200*Φ8 | 78 |
NHD-200 | 200 | 12 | 350 | 380/3Φ | 1180*840*1760 | 230*230*Φ11.5 | 110 |
NHD-300 | 300 | 15 | 750 | 380/3Φ | 1420*1000*1830 | 275*275*Φ12 | 152 |
NHD-400 | 400 | 15 | 750 | 380/3Φ | 1480*1060*2020 | 275*275*Φ12 | 170 |
NHD-600 | 600 | 20 | 1100 | 380/3Φ | 1580*1160*2400 | 280*280*Φ13.5 | 280 |
NHD-800 | 800 | 30 | 2200 | 380/3Φ | 1830*1280*2480 | 350*350*Φ13.5 | 460 |
NHD-1000 | 1000 | 40 | 2200 | 380/3Φ | 2020*1420*2480 | 500*500*Φ13.5 | 680 |
NHD-1500 | 1500 | 50 | 300 | 380/3Φ | 2040*1420*3190 | 500*500*Φ13.5 | 800 |
Plastic resin dryer Features
1. Plastic resin dryer use a uniform high-performance hot air expansion device to keep the plastic drying temperature uniform and increase the drying efficiency.
2. Stainless steel heating tube bent design, to avoid burning caused by the accumulation of raw material dust bottom.
3. The raw material contact surface is made of all stainless steel materials. The barrel body is separated from the bottom and the material is cleaned and replaced more conveniently.
4. recision die-cast aluminum shell, smooth surface, good insulation properties.
5. A proportional deviation temperature controller is used to precisely control the temperature.
6. Double overheat protection device can reduce accidents caused by human or mechanical failure.
7. Barrels and bases are equipped with viewing windows for direct observation of internal materials.
8. Quiet fan to ensure the cleanliness of raw materials.
Pictures and Connect with Loader:
Certificates: