Factory supply Vacuum Plastic Loading Machinery
The control device starts the vacuum motor to extract the air in the hopper, and at the same time closes the blanking valve device, so that a negative pressure is generated in the copy hopper. Under the effect of negative pressure, the external materials are carried into the hopper 100 by the air flow through the feeding pipe. At the end of the labor time, the vacuum motor stops working, the internal blanking valve device valve is pushed open by the raw material, and the material flows out of the hopper into the injection molding machine or extruder or other equipment.
The suction machine is widely used in the raw material transportation of injection molding, and can be automatically fed to the injection molding machine. When there is a lack of material in the barrel of the injection molding machine, a signal will be given to the suction machine.
The suction machine uses the principle of ventilation to deliver plastic raw materials to the barrel of the injection molding machine. When the material reaches a certain level, the suction opportunity stops, and when the material is not enough, it can be conveyed again.
DONGGUAN NASER MACHINERY CO.,LTD.
1. Payment Terms:
T/T - 30% deposit before production, 70% balance before delivery, or other terms
2. Delivery Detail:
About 10 workdays after payments.
3. Pacage Terms:
International Standard Wooden Case for Export