What is the appropriate amount of refrigerant used in Scroll Chiller?
If the industrial Scroll Chiller has been used for more than six months, or the high and low pressure engine often fails, or the refrigeration capacity is reduced, please arrange the staff to clean the radiator. Refrigerants, as we all know, is a kind of industrial rolling chiller is indispensable material, then you know rolling cold water machine the refrigerant filling quantity in use process for how much is ok for you?
Industrial rolling cold water machine in using time filling machine filling refrigerant, only at the end of the time, take time to stop valve closing time filling machine, open the liquid valve, filling refrigerant to the refrigeration system. Rolling cold water machine the refrigerant filling quantity in general, do not charge nor much charge less, small industrial rolling cold water machine device using quantitative filling machine filling refrigerant, only in the refrigerating plant good vacuum closed after three-way valve, stop the vacuum pump, with the vacuum pump and the pressure hose connector to be removed, in between the produced liquid quantitative filling machine, open the liquid valve will discharge the air in the hose, then tighten hose connection, check whether the leak.
Industrial rolling cold water machine refrigerant charging refrigerant, the first observation of filling pressure gauge readings on the scale rotating sleeve, found on the sleeve and the pressure gauges corresponding quantitative liquid line, write down the initial liquid level calibration of refrigerant inside the glass tube. Then open the three-way valve, and the refrigerant enters the refrigeration system through the tubing, and the liquid surface of the refrigerant in the glass tube begins to decline. When the amount of filling capacity is reached, the solution between the liquid and the three of the filling is closed.
Industrial Scroll Chiller is used in many fields. Plastic, electrons. Electroplating. Laser, food, textile, chemical. The packing. Medical care. Industries such as testing, and even beverages, beer production lines, industrial refrigeration equipment, industrial Scroll Chiller plays an important role.
The industrial Scroll Chiller can be divided into two types: water-cooled Scroll Chiller and air-cooled Scroll Chiller in the form of refrigeration. Do you know the two kinds of refrigeration? Here's a look at the following:
Refrigerated Scroll Chiller:
(1) high performance compressor, high EER value, low noise, high energy efficiency, low energy consumption and stable operation. (2) adopt efficient heat exchanger, with less cold loss, oil separator is easy to return oil and safety, heat transfer pipe is not easy to burst. (3) ergonomic panel, full automatic control, equipped with precision electric temperature controller, can run smoothly for a long time.
Cooling type of air cooled rolling chiller:
(1) use high performance compressor, high EER value, low noise, high energy efficiency, low energy consumption and stable operation. (2) it is easy to install, and it is suitable for the water supply. (3) the cooling and condensing effect of indoor machine is good, stable throttling and excellent anti-rust treatment.
Do you want to know how industrial rolling cold water units can save energy? Today, we share our own experiences.
The industrial rolling chiller can improve the evaporation temperature and reduce the condensation temperature by lowering the condensing temperature to meet the safety and production requirements of the equipment. Adjust temperature rolling cold water unit reasonable run load under the condition of the guarantee the safe operation of the equipment, refrigeration host running at 70% 80% load than running at 100% load, unit power consumption of cooling capacity is smaller. The operation of water pump and cooling tower should be considered in this way.