Scroll Chiller choice must be analyzed in a number of ways
Correct and reasonable choice Scroll Chiller, not only to meet the needs of production, but also can reduce a lot of unnecessary trouble, so we choose Scroll Chiller, we must pay attention to the details of the problem, all-round analysis!
1. Temperature range: According to the different temperature range, Scroll Chiller is divided into standard Scroll Chiller and low temperature Scroll Chiller. Standard Scroll Chiller temperature range of 3-35 degrees, low temperature Scroll Chiller temperature range of 0-20 degrees.
2. Type selection: Scroll Chiller is mainly divided into water-cooled Scroll Chiller and air-cooled Scroll Chiller. Water-cooled Scroll Chiller requires a cooling tower, a circulating water pump, and a water tower for heat dissipation. The air-cooled Scroll Chiller does not require other equipment, through its own fan and air to heat.
3. Model selection: to determine the type of Scroll Chiller later, but also doomed models of choice. Because each Scroll Chiller specifications also have a lot of models. So we with Scroll Chiller, we must carefully calculate the cooling capacity and chilled water and other parameters.
Scroll Chiller Reduce the condensation temperature to meet the safety and production needs of the premise, as far as possible to improve the evaporation temperature and reduce the condensation temperature. This has increased the transformation of the cooling tower to ensure the cooling water efficiency. In order to ensure the safe operation of the equipment reasonable adjustment Scroll Chiller reasonable running load, use this way to start the combination of pumps, cooling tower to consider the operation of the operation. Prevent and reduce Sclick Chiller pipe fouling to improve the heat transfer efficiency of condensers and evaporators. Scroll Chiller should use the refrigerator frequency conversion device, variable frequency centrifugal refrigerator can be based on the load changes, automatically adjust the compressor speed, energy-saving space is relatively large.
Scroll Chiller is a water cooling device, Scroll Chiller is a constant temperature, constant current, constant pressure cooling water equipment. How can we make our Scroll Chiller better? First keep the Scroll Chiller filter surface clean, filter the surrounding air circulation, regular cleaning filter, usually three weeks with compressed air purge filter once. Reduce the mold "sweat" phenomenon. Before stopping the plastic machine, turn off the cold water gate of the accessory mold, or turn off the Scroll Chiller, so that the mold temperature within the mold, the mold will not produce rust. If Scroll Chiller has been used for more than half a year, or if the high and low pressure engines are often malfunctioning or the cooling capacity is reduced, please arrange the technician to clean the radiator (eg Scroll Chiller has installed pressure gauge, high pressure gauge pressure is higher than 300 PSI, Should clean the surface of the radiator, keep clean and improve the radiator effect.Scroll Chiller if the first to the machine into a certain amount of water tank, through the Scroll Chiller cooling system will be water cooling, and then by the pump will be low-temperature cooling water into the equipment to be cooled , Scroll Chiller Chilled water will heat away after the heat and then back to the tank, to achieve the role of cooling. Cooling water temperature can be adjusted automatically, long-term use can save water.Therefore, Scroll Chiller is a standard energy-saving equipment.
Scroll Chiller is used to control the products, mechanisms and factories of mechanical cooling of all walks of life. Scroll Chiller uses a new original imported compressor, is Daikin Panasonic series, the product of the energy efficiency ratio higher. Condenser with vertical shell and tube design, evaporator copper tube with high efficiency internal thread copper tube, can effectively improve the thermal effect, cleaning is also convenient. Industrial applications for the Scroll Chiller group can be concentrated, each unit cools to meet a variety of needs, or is distributed in each application or device has its own chiller. Each method has its advantages. It may also have a central and decentralized chiller combined, especially when the cooling requirements are the same for some applications or using points, but not all.