Repair And Repair Of Screw Water Chiller

Repair And Repair Of Screw Water Chiller

Date:Aug 16, 2017

Repair and Repair of screw water chiller
The overall maintenance of the screw water chiller, as well as the maintenance of the various parts, has been introduced in front of it, but in its maintenance and maintenance, but also missed a knowledge point, that is, its precautions, so today To make a good explanation, so that we can fully understand and master this knowledge.
General precautions
(1) the degree of tightening of the belt in the blower to be adjusted, because if the collection is too tight, but will damage the bearing, making the screw water chiller can not be used normally.
(2) filters and other components, should be regularly cleaned, it is best to conduct a month to avoid being blocked.
(3) screw water chiller before use, to check whether there is a foreign body in the tower, no problem before the boot operation.
(4) cooling the circulating water should be replaced regularly to maintain good water quality. Moreover, the lower sink should be cleaned regularly to prevent accumulation of dirt. In addition, you can also install automatic water changing device, so it is more convenient to operate.
2. Precautions during winter transportation
Circulating water should be periodically discharged to prevent freezing at low temperatures. If it is closed, but also open the drain valve to ensure that water can flow.
3. Other considerations
(1) Before using the screw water chiller, carefully read the instructions and follow the regulations to avoid damage to the equipment.
(2) When the blower is running, it is forbidden to touch.
(3) electric heater work will produce heat, so work do not touch by hand, so as not to be burned
In recent years, with the continuous development of the economy, as well as technological innovation and progress, screw water chiller has been widely used in various fields, and promote social economic development. In daily life, screw water chiller often a variety of problems, seriously affecting its cooling effect. For why so, many users are not aware of, and even some professional people are puzzling, resulting in economic losses. So, in order to reduce the economic waste, which areas need to effectively improve the screw water chiller production efficiency? In general, the screw water chiller is mainly since the coolant to work, and the coolant in the long process of use, inevitably there will be some calcium precipitation. Once the sedimentation time is long, these calcium will accumulate more, thus seriously affecting the normal work of the screw water chiller. Therefore, we can see that the reason why the screw water chiller production efficiency is not high, because it is not regularly cleaned up, resulting in more and more accumulation of stolen goods is not conducive to the normal operation of the screw water chiller. So, how to better solve this problem? First of all, often to the screw water chiller parts carefully cleaned, can not ignore every detail, to prevent its long time does not clean up caused by screw water chiller production efficiency is low. Then, the normal operation, the staff must always check the screw water chiller of the various components, in the connection by adding the appropriate lubricants to ensure that it can be used normally. screw water chiller is so popular, the key lies in its own strong advantage, so that its development prospects more and more broad.


Previous: How To Maintain And Maintain The Operation Of The Cooling Tower

Next: How Should Rolling Scroll Chillers Choose?