Cooling Tower market advantages are:
1. Cooling Tower steel frame: Cooling Tower All steel frame are acid and rust after hot-dip galvanizing treatment; hot-dip galvanized steel frame after treatment is not only the most important is the long life, The normal life of at least 15 years or more, the service life is more than five times the ordinary paint anti-corrosion treatment.
2. Cooling Tower shell: FRP material shell surface coated with imported gel coat, long-term use does not fade, anti-aging anti-ultraviolet ability, shell resin content of more than 85%, flexibility and super, and the thickness of glass steel shell is much larger than Other Cooling Tower manufacturers, glass steel shell life of more than three decades.
3. Cooling Tower motor: I plant the use of the Cooling Tower motor for the well-known domestic manufacturers of the Y series of three-phase induction motor, the protection level IP55, whether it is life or energy, than any other series of motor superior.
4. Cooling Tower fan: Cooling Tower fan for our factory independent research and development of wing-type aluminum alloy energy-saving fan, the fan blade angle can be adjusted according to the scene transformation, aluminum fan life of more than ten years normal.
5. Cooling Tower packing: I plant independent production of Cooling Tower packing series, are using a new material based PVC and PP material series, its beautiful appearance, packing texture clear, light weight design is reasonable; I plant production of renewable PVC material regardless Is the quality or service life with the new PVC material is almost exactly the same, the appearance of no damage, toughness super, handless.
6. Cooling Tower water collector: I plant the production of each Cooling Tower are equipped with energy-saving water collector, the use of energy-saving collector completely solve the Cooling Tower bleaching phenomenon occurred.
7. Technical team: I plant a dedicated technical staff, the production of each Cooling Tower will be equipped with all the technical information on the FRP Cooling Tower.
8. Perfect after-sales service: after-sales service is a company's strength, no after-sales manufacturers will eventually be eliminated; I plant after-sales team 24 hours boot, completely solve the use of Cooling Tower users to worry about.
Cooling Tower as a water cycle system essential cooling equipment, the Cooling Tower can not normally exceed the total Cooling Tower cooling rate of 3%, but many companies in the Cooling Tower running at the Cooling Tower outlet at the obvious white mist , And even serious with the next rain, the Cooling Tower around 30 meters are wet, as this situation shows the existence of serious Cooling Tower cooling problem, need to be resolved as soon as possible.
First of all, to explain why the Cooling Tower why there will be drift phenomenon, because the Cooling Tower is a water cycle cooling equipment, because the tower's circulating water temperature is higher than the outdoor air temperature, there is a temperature difference between the two, so it will appear White mist-like heat, this situation is more obvious in the winter; and Cooling Tower mainly by the fan for ventilation, Cooling Tower in the process of pumping will take away a lot of air volume, so speed up the phenomenon of circulating water bleaching.
Here, we analyze the reasons for the Cooling Tower bleaching water:
1, Cooling Tower cut corners, no anti-flood measures. Now a lot of Cooling Tower manufacturers in order to save costs, will be used in the Cooling Tower materials on the hands and feet, the Cooling Tower is usually equipped with the factory put the drainage measures, such as fixed spray system Cooling Tower, must be equipped with V-shaped Water, and the rotating water system Cooling Tower sprinkler on the watertight, as long as with these two kinds of waterproof measures, the Cooling Tower can basically solve the phenomenon of water.
2, Cooling Tower pump pressure is too large. Cooling Tower pump pressure once too large, will cause the circulating water flow rate is too large, will directly lead to serious cooling water splashing.
3, the Cooling Tower air volume is too large. Cooling Tower air volume depends on the Cooling Tower motor power and fan angle, large air volume is also caused by Cooling Tower bleaching phenomenon is one of the main reasons.