[[TitleIndustry]]

Working principle of suction machine

Date:Mar 31, 2020

The working principle of the suction machine is that the control device starts the motor to extract the air in the hopper, and at the same time closes the blanking device, so that a negative pressure is generated in the hopper. Under negative pressure, the material in the storage cylinder is sucked into the hopper through the conveying pipe. When the set time is reached, the motor stops working, the internal blanking device automatically opens the material blocking plate, and the material flows out of the hopper into the injection molding machine or other auxiliary machines.


Industrial use of aerodynamics to transfer flowable materials, in order to further facilitate the use of materials transportation machinery and equipment.


Suction machine is widely used in the raw material conveying industry of injection molding machines. It has auxiliary equipment that is easy to install, easy to use, strong in long-distance transportation, stable in production, reliable in operation and operation, and fully automated production:


Suction machine is also known as plastic suction machine, feeding machine, feeding machine, filling machine, etc. suitable for short materials, if the material is too long, it is easy to wind the shaft and cannot be used. The suction machine can be used together with the pulverizer. When in use, the size of the gong bottom hole of the crusher can be appropriately adjusted to meet the suction hole of the suction machine.


Suction machine can be divided into two types: direct suction machine and split suction machine. The single suction machine uses a carbon brush motor. The carbon brush is easy to wear and cannot be repaired and can only be replaced as a whole. The split suction machine uses an induction motor, which can be repaired even if it is damaged.

plastic loader feeder

Previous: auto loader work principle

Next: Basic Operation Of Suction Machine