What factors can affect cooling tower cooling
The cooling tower reminds you to use the cooling tower in order to achieve a certain cooling effect. The cooling effect depends on the heat sink and the fan air volume. The amount of water used in the cooling tower, the ventilation conditions, and the installation location will also have a certain effect on its effectiveness. Here we take a look at the cooling tower cooling fins and fan cooling system impact: 1 heat sink: a key component of the cooling tower, small towers generally use PVC sheet hot or hot suction type, large towers will use wood The main purpose is to make the interface between air and water not affect the wind resistance, the bigger the better, and at the same time the heat exchange rate reaches the maximum. The two parameters of heat transfer plate affect the heat transfer effect, mainly the heat sink shape and height, Water tower installation, try not to damage the heat sink, so as not to poor heat sink flow. 2 Fan air volume: It mainly accelerates the air flow in the tower, accelerates the heat exchange between air and water, and takes away heat. Affecting the fan air volume is mainly the shape of the fan blade that is the width of the blade and its own declination, fan speed, installation angle, speed and motor and transmission ratio. In addition, in the case of a constant amount of air, the same type of tower, a smaller amount of cooling water than the amount of cooling water cooling effect is better.