The suction machine is used to convey the raw materials of injection molding and can automatically feed the materials to the injection molding machine. When there is no material in the barrel of the plastic central feeding system, a signal of the suction machine will be given. The suction machine uses the principle of air extraction to transport the plastic raw materials into the barrel of the injection molding machine. When the material reaches a certain level, the suction machine stops, and it can be transported again when the material is insufficient.
The suction machine is a new type of small central feeding machine based on the original suction machine. It has powerful suction, simple operation, beautiful appearance, safe and convenient. The machine is equipped with a high-pressure fan and one or six central vacuum hoppers. , It is suitable for multiple dehumidifying and drying feeding or feeding the raw materials to different molding machines or barrels within one to six separately, which can greatly save space and cost, and can also be upgraded to multiple molding machines.
The suction machine can be divided into two types: direct suction machine and split suction machine. The single suction machine uses a carbon brush motor. If the motor is damaged, it can be replaced. The split suction machine adopts independent motor, which can be used with multiple suction machines at the same time.
The suction machine can be used together with the crusher. When used, the size of the bottom hole of the gong of the crusher can be adjusted appropriately according to the use situation to meet the conveying hole of the suction machine. If the material is too long, it is easy to wrap around the shaft, which is not conducive to use. 
Definition of suction machine terms
In industry and agriculture, the energy of the air flow is used to transfer the flowable materials, so that the materials are further beneficial to the use of material conveying machinery equipment
←Previous: No Information