1. The preparation work before using
According to the need of fineness, adjusting grain blade gap, with different aperture of the screen.
A: Open doors and incoming material nets, check whether there is room pulverizer things or metal material.
B: Check the gap of stationary cutter and rotary cutter. whether the bolt blade is locked, whether spring washers compaction effect.
C: Turn the handwheel, check with the hand is normal operation.
D: Check incoming gum plate and incoming connections are firm or not, Whether the lock nut pressure
E: The spindle bearing tsui should inject enough oil
2. The machine's operation
A: Operators must be familiar with the machine working principle and the structure
B: Check whether the motor to correct(Refer to the belt cover the arrows on the instructions)
C: Check whether the degree of tightness of the belt
D: Boot for five minutes, check whether the idle running normal operation
E: When the machine work, the operator should take such as protective glasses and ears, and shall feed in the mouth side feeding machine, not facing the living charging.