Plastic crusher notices
Abnormal vibrituion of plastic crusher
1,the material may be too large, you can check the feed size.
2,uneven wear, indicating counterattack hammer need to be replaced,
3,rotor imbalance, need to adjust,
4.If the foundation is not properly handled, check the anchor bolts and reinforce them.
Plastic crusher bearing heating
1.The grease is insufficient, the grease is too much, and the grease is deteriorating. The bearing should be cleaned first, and then 50% of the space volume of the grease should be added to the bearing.
2,bearing damage, to replace the bearing in time
3,the upper cover is too tight, it is necessary to adjust the bolts, moderate elasticity is appropriate.