Plastic crusher message
1.Reduced plastic crusher output:
Cause: The gap between the screen bars was blocked; the feeding was not uniform.
Remedy: Stop, clean up the blockage in the screen strip gap; adjust the feeding mechanism.
2.Flexible coupling produces a knocking sound:
Reason: pin loose; elastic ring wear;
Plastic crusher troubleshooting method: stop and tighten the pin nut; replace the elastic ring.
3.Knocking inside the machine
Causes: Non-broken objects enter the interior of the machine; lining plate fasteners loose, hammer strikes the lining plate; hammers or other parts break.
Remedy: Stop and clean the crushing chamber; check the fastening of the liner and the gap between the hammer and the screen; replace the broken parts.