[[TitleIndustry]]

How should Plastic Pulverizers be treated?

Date:Jul 04, 2018

How should Plastic Pulverizers be treated?

As a kind of blade type pulverizer, the plastic pulverizer uses the shearing and closing action of the movable knives and the fixed knives to cut and pulverize the materials entering the machine cavity, and in the process, after cutting, it conforms to the size of the plastic pulverizer screen. The material is filtered through the bottom screen to filter the plastic pulverizer, and the plastic sheet material larger than the screen aperture is tumbling upwards under the action of the internal air flow and again into the cutting edge cutting area for further pulverization. After the material clogging or unloading of the plastic pulverizer, we analyze the basic operating principle of the equipment.

1.The material entering the machine cavity is too small. The plastic crusher caused by the material rolling up under the air flow inside the machine cavity does not cut the material. Solution: The material should be added continuously.

2.If the blade gap is too large, the material will not be unloaded. The material of the plastic pulverizer blade should be adjusted according to the smashing of different materials. Solution: Adjust the blade gap to the proper position.

3.The mesh aperture is too small, and the bottom of the screen is blocked due to too fast plastic feeding.

4.For the large plastic crusher, the NASER machines are generally equipped with a discharge conveying mechanism. The customer needs to adjust the discharge device according to the actual material during production to avoid the blockage of the bottom of the screen caused by the slow discharge rate. phenomenon.

Previous: Two major aspects of Plastic Crusher

Next: How do the blades of the plastic shredder be properly ground?