Effect of suction machine
The suction machine is used for the injection of raw materials for injection molding and can be automatically fed to the injection molding machine. When the material in the tank of the plastic central feeding system is missing, the suction machine signal is given. The suction machine uses the principle of suction to transport the plastic raw material to the barrel of the injection molding machine. When the material reaches a certain level, the suction opportunity stops, and when the material is not enough, it can be transported again. The suction machine is based on the original suction machine. It develops and designs a new type of small central feeding machine. It has strong suction, simple operation, beautiful appearance, safety and convenience. The machine is equipped with a high pressure fan and one or six central vacuum hoppers. It is suitable for multiple desiccant drying feeds or separately supplying a pair of six raw materials to different molding machines or buckets, which can save space and cost, and can be upgraded to multiple molding machines. Classification Suction machine can be divided into direct suction machine and split type suction machine. The single type suction machine adopts carbon brush type motor. If the motor is damaged, it can be replaced. The split type suction machine adopts a free-standing motor and can be used simultaneously with multiple suction machines. The suction machine can be used together with the pulverizer. When used, the size of the bottom hole of the crusher can be adjusted according to the use condition, and the suction hole of the suction machine can be used. If the material is too long, it is easy to wind the shaft, which is not conducive to use.