1, stirring and drying synchronization, due to the material during the drying process, continue to maintain the flow state, heat penetration, drying time is short and easy to fast;
2. The standard model is a double-layer barrel design (economic type is a single-layer design), and the inner layer is made of stainless steel material for the material contact part; the middle sandwich installation and special insulation materials can achieve safety and energy saving effects;
3, with high-frequency heater, fast heating, low power consumption, the total cost per ton of material drying is more than 20 yuan per ton;
4. Ad hoc dual-pipe vents can effectively discharge moisture, collect dust, and do not pollute the working environment;
5. The entrance door is used for the barrel body, and the color refilling and cleaning are simple and quick;
6, after a special modification, the standard model is easy to use for plastic powder, PET sheet crystal drying purposes;
7, more models, large capacity, standing a performance load: 0,5T, 1 ton, 1.5 tons, 2 tons, 3 tons and so on.
8, dry mixing function in one, when you do not need to dry, just turn off the heating switch and fan switch, the standard model can be used for plastic stirring homogenization purposes, one machine for two.
←Previous: what is plastic mixer?
Next: No Information→