30 Ton Industrial Cooling Tower For Plastic Injection Machine

30 Ton Industrial Cooling Tower For Plastic Injection Machine

30 ton industrial cooling tower for plastic injection machine Working Principle 1. Water working flowing inside of the coils, which is enwrapped by spray water on the outside. The heat of water is transferred by coil and become the saturated vapor when meet the water and air. 2. The heat is...

30 ton industrial cooling tower for plastic injection machine


Working Principle

1. Water working flowing inside of the coils, which is enwrapped by spray water on the outside. The heat of water is transferred by coil and become the saturated vapor when meet the water and air.

2. The heat is exhausted out of the tower by the tower by the top fan; water is collected back to the bottom tank and circulates continuously. The spray water is cooled down via PVC radiation fin in the process of circulation, and flow is the same direction with the fresh wind. The coil mainly takes sensible heat travel style.

3. The most benefit of this style is can avoid scale formation on the outside of the coil. And this will apply especially to dealing with high temperature fluid or the fluid need big temperature difference.


Specification

specification

Hot Tags: 30 ton industrial cooling tower for plastic injection machine manufacturers China. suppliers, factory, wholesale, made in China