screw water chiller with single compressor
The screw chiller is named as the screw chiller because of its key component. The compressor is a screw chiller. The unit is a gas refrigerant from the evaporator. After the compressor is adiabatically compressed, it becomes a high temperature and high pressure state. The compressed gas refrigerant is cooled and condensed in the condenser under constant pressure. After the condensation, it changes to a liquid refrigerant, which is then expanded to a low pressure by a throttle valve and becomes a gas-liquid mixture. Among them, the liquid refrigerant at low temperature and low pressure absorbs the heat of the material to be cooled in the evaporator, and becomes a gaseous refrigerant again. The gaseous refrigerant re-enters the compressor through the pipeline and starts a new cycle. These are the four processes of the refrigeration cycle and the main working principle of the screw chiller.
Industrial water-cooled chillers are mainly suitable for plastics and mechanical processing. It can accurately control the temperature of plastic forming molds to shorten the molding cycle and accelerate product setting. This series uses the principle of cold and heat exchange for cooling, which can quickly cool down and stabilize temperature control. And not affected by environmental factors, it is an indispensable configuration equipment in modern industry.
DONGGUAN NASER MACHINERY CO.,LTD.
T/T - 30% deposit before production, 70% balance before delivery, or other terms
2. Delivery Detail:
About 10 workdays after payments.
3. Pacage Terms:
International Standard Wooden Case for Export