20Years Manufactures 3HPWater Cooled chiller machine
Item: Water Cooled chiller NWS-3WC
Standard equipped Iron pump,stainless steel or high lift pump for option .
Input power :380V/415V 3Phase 50HZ/60HZ
Over sized evaporator and condenser ensure the chiller unit running under 45℃ high ambient temperature.
Refrigerating capacity on the based on the chilled water inlet tempearture 20℃，outlet tempearture 15℃.
1. Turn on the power switch
2. Turn on the switch of the water pump (Note: Without cooling tower, the air chillers haven’t a switch as “COOLING TOWER”). Also, please make sure the water inlet and outlet valves are both opened.
3. Press the button “RUN”, then the water pump starts running. The compressor will be running automatically with the delaying switch. Please check and adjust the required temp. You can open the hot water switch, heating water. (Note: the initial use of the cooling water pump and heat pump water from freezing, respectively, backwater nozzle and hot water ingress of water, flows normally opened again without adding water)
4. Please turn off the machine according to the opposite operating sequence.
Next: Extruder Chiller→