NWS-2AC Industrial Air Cooled Water Chiller For Cooling Water

Thermal Cycle Air Blast Chiller Unit 2HP

Thermal Cycle Air Blast Chiller Unit 2HP consists of four main parts: compressor, condenser, thermostatic expansion valve and evaporator. It uses single-stage steam compress refrigeration system and applies the principle of refrigerant gas-liquid conversion to absorb and release of heat, to achieve the effect of cooling.

• Regular cleaning condenser and evaporator, so to maintain the good functioning of the whole;

• Keep the cooling tower clean, regular cleaning, cooling tower may not have debris and other obstacles, cooling pipes should be installed filters.

• Keep the radiator surface clean, and regular cleaning, the machine to maintain good performance. The winter is not Chiller chiller heat exchange should be drained of water. Prevent the cracking heat exchange.

                                                                 Product introduction

        Industrial Chiller is a kind of machine that used to produce cooling water which lower than normal temperature，is mainly applied in plastic & rubber industry；it can accurately control the molding temperature and shorten the molding cycle,increase the product quality and improve the production efficiency.They are also widely used in metal working,electronics industruction and military.Industrial Chiller is diveded into water-cooled and air-cooled.

As an industrial water chiller, it has the following features:

1. Our compressor is imported from Italy,France and so on, being of  high-quality built-in safe protection, with low noise, the electricity of province is durable.

2. Cooling capacity range: 113.8kw~838kw.

3. Normal conditions: Chilled water inlet temperature is 12 degree, outlet temperature is 7 degrees. Cooling water inlet temperature is 30 degrees, outlet temperature is 35 degrees. But the lowest temperature can be -25 degress.

4. Stardard Input power: 3P-380V-50Hz, Allowable fluctuate voltage: ± 10%, allowable voltage difference in phase: ± 2%,Can also be customized according to customers’request

5. The quantity of compressor can be one or two ,each compressor is independent refrigeration system. Each other run independently.when the one is working ,the other can be working or not.

6. Use PLC microcomputer control from Germany Siemens LCD touch screen, both English and Chinese human-machine interface.

7. Wide range of variable chilled water temperature to meet the industrial requirements throughout whole year.

8.Our standard refrigerant is R22, but you can choose to use environmental refrigerant such as R407C , R134A or R507.