Pictures For 6Ton Air Cooler Cooled Water Chiller For Industrial Mold
![]() | ![]() |
![]() | ![]() |
Specification For 6Ton Air Cooler Cooled Water Chiller For Industrial Mold
Model | NWS-6AC |
Rated cooling capacity | 21.22 KW/ 18249 Kcal/H/ 6 USRT |
Voltage | 380V/3P/50Hz (optional) |
Compressor | Panasonic 6hp scroll type |
Condenser | high effective red copper pipe covered into aluminum fins |
Evaporator | Tank with copper coil/ shell and tube/ ss plate heat exchanger |
Water tank capacity | 55 L |
Chilled water flow | 3.65 M3/H |
Water pipe | DN 25 MM |
Water Pump | 1 HP |
Weight | 190 KG |
Measure | 1140*560*1040 MM |
Note: chilled water temperature standard is 5-35 degree adjustable.
Chiller rated cooling capacity is based on chilled water 15 degree.
Detail Picture For 6 Ton Air Cooler Cooled Water Chiller For Industrial Mold
Parts For 6Ton Air Cooler Cooled Water Chiller For Industrial Mold
1) Fan
High wind volume axial flow design, imported heat-changing fan, heat exchange efficiency is significant. Low noise fan and high efficiency motor, with large air volume, small vibration, external protection fence, to achieve a good heat dissipation effect, its fan using high-strength hard aluminum alloy production, blade stamping molding, and by strict movement of the two balance test, quality is better than peers.
2) Schneider Electrical System
The intelligent control system of microcomputer is precisely controlled, Simple operation, intelligent start and stop, Precision temperature control within 5 to 35 degrees of arbitrary adjustment, LCD display, all kinds of faults at a glance, Monitor ingends in real time, Multiple protection features, The Chinese and English interface sits to switch, To meet the needs of different users, Easy to operate.
Qualification For 6 Ton Air Cooler Cooled Water Chiller For Industrial Mold
More Models For 6 Ton Air Cooler Cooled Water Chiller For Industrial Mold