Thailand High Quality Air Cooling Injection Molding Chiller Machine Price From China

Industrial chiller is a kind of machine that used to produce cooling water which is lower than normal temperature.

Sea water Air Cooling Cooled Chiller Price/Supplier 

Industrial chiller systems are used not only in large industries but also in small industries. In fact, they are used in almost all homes of air conditioners to provide a controlled cooling mechanism. With such a wide range of uses, they are not only necessary to operate the machine, but also necessary to keep up with the operation of the machine. This is why you should buy the best quality chillers so that they work with your machine instead of fighting it.


Porduct Introduction 

1.The industrial chiller is divided into two categories: water-cooled chiller and air-cooled chiller. Water-cooled chiller cooled by water, using with cooling tower and water pump, the other cooled by fan, can be used independently.
2.Our compressor is imported from Italy, France and so on, being of  high-quality built-in safe protection, with low noise, the electricity of province is durable.

3. Cooling capacity range: 9.8kw~189kw
4. Normal conditions: Chilled water inlet temperature is 20 degrees, outlet temperature is 15 degrees. Cooling water inlet temperature is 30 degrees, outlet temperature is 35 degrees. But the temperature can be set in 5-30 degree range according to customers’ request, and the lowest temperature can arrive -25 degree.
5. Standard Input power: 3P-380V-50Hz, Allowable fluctuate voltage: ± 10%, allowable voltage difference in phase: ± 2%,Can also be customized according to customers’ request
6. The quantity of compressor can be one or two ,each compressor is independent refrigeration system. Each other run independently. when the one is working ,the other can be working or not.
7. The quantity of compressor can be 1 to 4 ,each compressor is independent refrigeration system. Each other run independently. when the one is working ,the other can be working or not.
8. Use PLC microcomputer control from France Schneider, both English and Chinese human-machine interface.
9. Wide range of variable chilled water temperature to meet the industrial requirements throughout whole year.
10. Our standard refrigerant is R22, but you can choose to use environmental refrigerant such as R407C , R134A or R507.


Specificates 

风冷式箱式冷水机


Pictures 


15AC.jpg

Specifications

                        Model                                       NWS-15AC
Item                             
Cooling Capacitykcal/h29928
KW34.8
Voltage3PH-380V/50Hz
RefrigerantTypeR22
Control Typecapillary Vessel
Compressor        TypeSanyo vortex type
PowerHP5*3
CondenserTypeEfficient copper tube aluminum finned and Low noise fan motor
Cooling Air Flowm3/h16000
EvaporatorTypePVC shell titanium tube evaporator( heat  exchange tube is titanium tube)
Freezing Water Flowm3/h6
Diameter of NippleDN50
Machine Sizemm1700*870*1680
Machine WeightKG680

 Note:

1.The cooling output is based on the following standard: Chilled Water Inlet/outlet Temperature of 12°C/7°C; Cooling Air inlet/outlet Temperature of 40°C~45°C.             2.Chilled Water outlet temperature range 6°C~30°C.   

3.The Chiller don;t have built-in pump.                 

4.  The specifications is subject to change without prior notice.    

 

Contact Terms

DONGGUAN NASER MACHINERY CO.,LTD.

Ms. SolarLala

Web: www.naserland.com

Whatsapp/wechat: +8613829297266

Skype: shirley_naser06

Email: naser024@naserland.hk

FAQ

1. Payment Terms:
T/T - 30% deposit before production, 70% balance before delivery, or other terms
2. Delivery Detail:
About 10 workdays after payments.
3. Pacage Terms:
International Standard Wooden Case for Export

The air-cooled chiller model has a compact structure, small size, and is easy to move. Equipped with two working modes of constant temperature and intelligent temperature adjustment, the intelligent temperature control mode can be adjusted to the corresponding water temperature with the change of temperature.

 

SeaFood Chiller, Seawater Air Cooled Chiller  manufacturer / supplier in China Specifications

 

                        Model                                       NWS-15AC
Item                             
Cooling Capacitykcal/h29928
KW34.8
Voltage3PH-380V/50Hz
RefrigerantTypeR22
Control Typecapillary Vessel
Compressor        TypeSanyo vortex type
PowerHP5*3
CondenserTypeEfficient copper tube aluminum finned and Low noise fan motor
Cooling Air Flowm3/h16000
EvaporatorTypePVC shell titanium tube evaporator( heat  exchange tube is titanium tube)
Freezing Water Flowm3/h6
Diameter of NippleDN50
Machine Sizemm1700*870*1680
Machine WeightKG680

 

 Note:

1.The cooling output is based on the following standard: Chilled Water Inlet/outlet Temperature of 12°C/7°C; Cooling Air inlet/outlet Temperature of 40°C~45°C.                         

2.Chilled Water outlet temperature range 6°C~30°C.   

3.The Chiller don;t have built-in pump.                 4.  The specifications is subject to change without prior notice.    

 


Hot Tags: thailand high quality air cooling injection molding chiller machine price from china manufacturers China. suppliers, factory, wholesale, made in China

Previous: No Information

Next: Cooled Chiller China Power Industrial Unit Food Technical Air Sales Video Rohs Energy Support